变压器绕组温度计 型号:BWR-04JJ(TH)库号:M396680
谢经理 18910282272
二 用途
BWR-04JJ(TH)变压器绕组温度计是变压器仪表。该仪表采用用机电一体化的原理而设计,该产品具有体积小、功能全、安装方便、操作简单等特点。并且可以输出双路DC(4-20)mA标准电流信号供计算机系统及二次仪表使用,实现无人电站管理。
三 工作原理
BWR-04JJ(TH)变压器绕组温度计,主要由弹性元件、传感导管、感温部件、电热元件、一体化变流器和数显仪组成。
变压器绕组温度计的温包插在变压器油箱顶层的油孔内(如图1所示),当变压器负荷为零时,绕组温度计的读数为变压器油的温度;当变压器带上负荷后,通过变压器电流互感器取出的与负荷成正比的电流,经变流器调整后流经嵌装在波纹管内的电热元件;电热元件产生的热量,使弹性元件的位移量增大。因此在变压器带上负荷后,弹性元件的位移量是由变压器顶层油温和变压器负荷电流二者所决定;变压器绕组温度计指示的温度是变压器油温与线圈对油的温升之和,反映了被测变压器线圈的热部位温度。
主要技术性能及参数
4.1 BWR-04JJ(TH)技术参数
4.1.1 输出信号:DC(4-20)mA标准电流信号
4.1.2 工作条件:环境温度(-40~+55)℃、相对湿度≤95%。
4.1.3 测量范围:(0~150)℃。
4.1.4 准确度:2.0级(检测点允许的大误差为±3℃)。
4.1.5 开关性能:四组可调开关,各组开关均能在全量程内任意设定。
4.1.6 开关动作误差:±2℃。
4.1.7 开关切换差:6±2℃。
4.1.8 开关额定功率:AC250V/5a。
4.1.9 温包尺寸:(Ф14×105)mm、安装螺纹为(M27×2)mm
4.1.10 毛细管长度:5m。
4.1.11 仪表外形尺寸及安装尺寸(见图2)。
4.1.12 防护等级:GB4208—84中IP55。
XMZ-YJ数字式温度显示仪技术参数
4.2.1 输入信号:DC(4~20)mA电流值。
4.2.2 工作条件:环境温度(0~50)℃、相对湿度≤85%。
4.2.3 工作电源:AC220×(1±10%)V、频率(50~60)Hz。
4.2.4 显围:0-150℃。
4.2.5 精度等级:1.0级。
4.2.6 显示方式:数码管显示。
4.2.7 安装方式:嵌装式。
4.2.8 外形尺寸:160mm×80mm×150mm。
4.2.9 开口尺寸:152+1mm×76+1mm
谢经理 18910282272
二 用途
BWR-04JJ(TH)变压器绕组温度计是变压器仪表。该仪表采用用机电一体化的原理而设计,该产品具有体积小、功能全、安装方便、操作简单等特点。并且可以输出双路DC(4-20)mA标准电流信号供计算机系统及二次仪表使用,实现无人电站管理。
三 工作原理
BWR-04JJ(TH)变压器绕组温度计,主要由弹性元件、传感导管、感温部件、电热元件、一体化变流器和数显仪组成。
变压器绕组温度计的温包插在变压器油箱顶层的油孔内(如图1所示),当变压器负荷为零时,绕组温度计的读数为变压器油的温度;当变压器带上负荷后,通过变压器电流互感器取出的与负荷成正比的电流,经变流器调整后流经嵌装在波纹管内的电热元件;电热元件产生的热量,使弹性元件的位移量增大。因此在变压器带上负荷后,弹性元件的位移量是由变压器顶层油温和变压器负荷电流二者所决定;变压器绕组温度计指示的温度是变压器油温与线圈对油的温升之和,反映了被测变压器线圈的热部位温度。
主要技术性能及参数
4.1 BWR-04JJ(TH)技术参数
4.1.1 输出信号:DC(4-20)mA标准电流信号
4.1.2 工作条件:环境温度(-40~+55)℃、相对湿度≤95%。
4.1.3 测量范围:(0~150)℃。
4.1.4 准确度:2.0级(检测点允许的大误差为±3℃)。
4.1.5 开关性能:四组可调开关,各组开关均能在全量程内任意设定。
4.1.6 开关动作误差:±2℃。
4.1.7 开关切换差:6±2℃。
4.1.8 开关额定功率:AC250V/5a。
4.1.9 温包尺寸:(Ф14×105)mm、安装螺纹为(M27×2)mm
4.1.10 毛细管长度:5m。
4.1.11 仪表外形尺寸及安装尺寸(见图2)。
4.1.12 防护等级:GB4208—84中IP55。
XMZ-YJ数字式温度显示仪技术参数
4.2.1 输入信号:DC(4~20)mA电流值。
4.2.2 工作条件:环境温度(0~50)℃、相对湿度≤85%。
4.2.3 工作电源:AC220×(1±10%)V、频率(50~60)Hz。
4.2.4 显围:0-150℃。
4.2.5 精度等级:1.0级。
4.2.6 显示方式:数码管显示。
4.2.7 安装方式:嵌装式。
4.2.8 外形尺寸:160mm×80mm×150mm。
4.2.9 开口尺寸:152+1mm×76+1mm
How Waste Incineration Works - Fireprint Green Waste Solutions
Fire print incinerators do not need fuel.
The combustion process does not require electricity.
We separate oxygen-rich gases from the air.
Help incinerator decompose garbage continuously.
There is no black smoke, no dust in the air.
A small amount of steam is discharged from the pipe.
Low temperature incineration has little carbon emissions.
2500W/380V power supply is required to eliminate steam odor.
Input 1.8-1.0 cubic garbage into the thermal decomposition furnace each time.
Enter household garbage 3-5 times a day. Fill it with garbage.
The low temperature of municipal solid waste pyrolysis furnace is 50 ~ 390 ℃.
Content volume 5m ³incineration equipment.
The burning capacity is between 1600 and 2000 kilograms.
Chimney output steam: Wood vinegar solution.
Ash from the outlet: ceramic ash with negative ions.
Excellent reduction: 1 pound 200 or 1 pound 500.
Total product quality: 8700KG.
Fire print low temperature magnetic gas waste pyrolysis device.
Easy to install and operate.
The device can be used for 10 to 20 years.
Power plant for removing steam odor:
Water pump, plasma high voltage electric field power supply, carbon monoxide catalysis.
Green waste incinerator can be customized:
Content product: 5 cubic meters, 2 tons of garbage disposal.
Content product: 10 cubic meters, 5 tons of garbage disposal.
Content product: 15 cubic meters, 7.5 tons of garbage.
Content product: 20 cubic meters, disposal of 10 tons of garbage.
Fire print incinerators do not need fuel.
The combustion process does not require electricity.
We separate oxygen-rich gases from the air.
Help incinerator decompose garbage continuously.
There is no black smoke, no dust in the air.
A small amount of steam is discharged from the pipe.
Low temperature incineration has little carbon emissions.
2500W/380V power supply is required to eliminate steam odor.
Input 1.8-1.0 cubic garbage into the thermal decomposition furnace each time.
Enter household garbage 3-5 times a day. Fill it with garbage.
The low temperature of municipal solid waste pyrolysis furnace is 50 ~ 390 ℃.
Content volume 5m ³incineration equipment.
The burning capacity is between 1600 and 2000 kilograms.
Chimney output steam: Wood vinegar solution.
Ash from the outlet: ceramic ash with negative ions.
Excellent reduction: 1 pound 200 or 1 pound 500.
Total product quality: 8700KG.
Fire print low temperature magnetic gas waste pyrolysis device.
Easy to install and operate.
The device can be used for 10 to 20 years.
Power plant for removing steam odor:
Water pump, plasma high voltage electric field power supply, carbon monoxide catalysis.
Green waste incinerator can be customized:
Content product: 5 cubic meters, 2 tons of garbage disposal.
Content product: 10 cubic meters, 5 tons of garbage disposal.
Content product: 15 cubic meters, 7.5 tons of garbage.
Content product: 20 cubic meters, disposal of 10 tons of garbage.
#由你#
【围观惠存周氵粉legend行为1.0——
面对新人耀武扬威、面对顶流迅速滑跪】
既然广场上还有周氵粉不依不饶,叫黑称、辱骂爱豆和粉丝。
那就来看一下面对歌手、顶流粉【图1-3】的时候,周氵导师的粉丝包括黄v,前倨后恭的滑跪行为吧【图4-9】
我们这边一直号召克制,但你们滑跪的样子太美了,记录一下。
现在你们知道开除黄v粉籍了【图10】,知道披皮黑搞事了,昨天怎么不知道呢[赞]
【围观惠存周氵粉legend行为1.0——
面对新人耀武扬威、面对顶流迅速滑跪】
既然广场上还有周氵粉不依不饶,叫黑称、辱骂爱豆和粉丝。
那就来看一下面对歌手、顶流粉【图1-3】的时候,周氵导师的粉丝包括黄v,前倨后恭的滑跪行为吧【图4-9】
我们这边一直号召克制,但你们滑跪的样子太美了,记录一下。
现在你们知道开除黄v粉籍了【图10】,知道披皮黑搞事了,昨天怎么不知道呢[赞]
✋热门推荐