加利福尼亚大学(尔湾),简称UC Irvine或UCI,又译加州大学尔湾分校或欧文分校✨
2⃣0⃣2⃣2⃣ 申请通道即将关闭‼️ 低 门保 录 大一直入 ,想申请的bb要抓紧时间啦‼️ ‼️ ‼️
在Money杂志2019年发布的美国大学性价比排名中,UCI凭借着得天独厚的地理位置和就业优势位列全美第一#美国留学#
2⃣0⃣2⃣2⃣ 申请通道即将关闭‼️ 低 门保 录 大一直入 ,想申请的bb要抓紧时间啦‼️ ‼️ ‼️
在Money杂志2019年发布的美国大学性价比排名中,UCI凭借着得天独厚的地理位置和就业优势位列全美第一#美国留学#
加利福尼亚大学(尔湾),简称UC Irvine或UCI,又译加州大学尔湾分校或欧文分校
2⃣0⃣2⃣2⃣ 申请通道即将关闭‼️ 低 门保 录 大一直入 ,想申请的bb要抓紧时间啦‼️ ‼️ ‼️
隶属于加利福尼亚大学系统,被誉为“公立常春藤”
在Money杂志2019年发布的美国大学性价比排名中,UCI凭借着得天独厚的地理位置和就业优势位列全美第一#美国留学#
2⃣0⃣2⃣2⃣ 申请通道即将关闭‼️ 低 门保 录 大一直入 ,想申请的bb要抓紧时间啦‼️ ‼️ ‼️
隶属于加利福尼亚大学系统,被誉为“公立常春藤”
在Money杂志2019年发布的美国大学性价比排名中,UCI凭借着得天独厚的地理位置和就业优势位列全美第一#美国留学#
【5G NR】在PUCCH上上报UCI 3GPP TS 38.213
9.2 UCI reporting in physical uplink control channel(6-5)
9.2.5 UE procedure for reporting multiple UCI types
9.2.5.1 UE procedure for multiplexing HARQ-ACK or CSI and SR in a PUCCH 38.213
SR(format0) + ACK(format1)
----------------------------
If a UE would transmit positive or negative SR in a resource using PUCCH format 0 and HARQ-ACK information bits in a resource using PUCCH format 1 in a slot, the UE transmits only a PUCCH with the HARQ-ACK information bits in the resource using PUCCH format 1.
搞明白这种场景为什么ACK不能在SR对应的PUCCH format0资源上发送。因为SR对应的PUCCH format0资源已经通过复用的方式分配给了多个用户(最多可以12个用户复用),这种PUCCH format0资源只能发送SR,不能发生任何ACK信息,1bit,2bits ACK都不能发送。
SR(format1) + ACK(format1)
----------------------------
If the UE would transmit positive SR in a first resource using PUCCH format 1 and at most two HARQ-ACK information bits in a second resource using PUCCH format 1 in a slot, the UE transmits a PUCCH with HARQ-ACK information bits in the first resource using PUCCH format 1 as described in Clause 9.2.3.
这种场景下,UE发送SR,UE不使用DCI中的PRI? UE在SR所在资源上发送SR+HARQ-ACK,不需要使用PRI所指示的PUCCH资源;
注意:这里UE在SR对应的PUCCH format1资源上发送HARQ-ACK,不送SR。
If a UE would transmit negative SR in a resource using PUCCH format 1 and at most two HARQ-ACK information bits in a resource using PUCCH format 1 in a slot, the UE transmits a PUCCH in the resource using PUCCH format 1 for HARQ-ACK information as described in Clause 9.2.3.
这种场景下,UE不发送SR,UE使用DCI的PRI所指示的PUCCH format1资源发送HARQ-ACK;
由于基站不知道该slot上UE是否会发送SR,所以基站侧的MAC会让PHY在SR所在PUCCH资源和DCI中的PRI所指示的PUCCH资源都进行检测接收;
如果基站侧的PHY在SR所在资源上检测出HARQ-ACK,则意味着UE发送了SR+ACK,在DCI的PRI所指示的PUCCH资源上检测不到任何信息;
如果基站侧的PHY在DCI的PRI所指示的PUCCH资源上检测HARQ-ACK;则意味着UE在该slot仅发送了ACK,同时基站侧的PHY在SR所在资源上检测不到任何信息;
注意:SR和ACK能够复用的前提是SR和ACK对应的PUCCH format1资源在同一个slot内时域上(符号上)有重叠。
9.2 UCI reporting in physical uplink control channel(6-5)
9.2.5 UE procedure for reporting multiple UCI types
9.2.5.1 UE procedure for multiplexing HARQ-ACK or CSI and SR in a PUCCH 38.213
SR(format0) + ACK(format1)
----------------------------
If a UE would transmit positive or negative SR in a resource using PUCCH format 0 and HARQ-ACK information bits in a resource using PUCCH format 1 in a slot, the UE transmits only a PUCCH with the HARQ-ACK information bits in the resource using PUCCH format 1.
搞明白这种场景为什么ACK不能在SR对应的PUCCH format0资源上发送。因为SR对应的PUCCH format0资源已经通过复用的方式分配给了多个用户(最多可以12个用户复用),这种PUCCH format0资源只能发送SR,不能发生任何ACK信息,1bit,2bits ACK都不能发送。
SR(format1) + ACK(format1)
----------------------------
If the UE would transmit positive SR in a first resource using PUCCH format 1 and at most two HARQ-ACK information bits in a second resource using PUCCH format 1 in a slot, the UE transmits a PUCCH with HARQ-ACK information bits in the first resource using PUCCH format 1 as described in Clause 9.2.3.
这种场景下,UE发送SR,UE不使用DCI中的PRI? UE在SR所在资源上发送SR+HARQ-ACK,不需要使用PRI所指示的PUCCH资源;
注意:这里UE在SR对应的PUCCH format1资源上发送HARQ-ACK,不送SR。
If a UE would transmit negative SR in a resource using PUCCH format 1 and at most two HARQ-ACK information bits in a resource using PUCCH format 1 in a slot, the UE transmits a PUCCH in the resource using PUCCH format 1 for HARQ-ACK information as described in Clause 9.2.3.
这种场景下,UE不发送SR,UE使用DCI的PRI所指示的PUCCH format1资源发送HARQ-ACK;
由于基站不知道该slot上UE是否会发送SR,所以基站侧的MAC会让PHY在SR所在PUCCH资源和DCI中的PRI所指示的PUCCH资源都进行检测接收;
如果基站侧的PHY在SR所在资源上检测出HARQ-ACK,则意味着UE发送了SR+ACK,在DCI的PRI所指示的PUCCH资源上检测不到任何信息;
如果基站侧的PHY在DCI的PRI所指示的PUCCH资源上检测HARQ-ACK;则意味着UE在该slot仅发送了ACK,同时基站侧的PHY在SR所在资源上检测不到任何信息;
注意:SR和ACK能够复用的前提是SR和ACK对应的PUCCH format1资源在同一个slot内时域上(符号上)有重叠。
✋热门推荐