•巴宝莉格子小标polo•
巴*莉 bur* 轻奢短袖翻领Polo衫糕端的工艺高端款！专属格纹拼接！胸前立体BT压花 炒好看的一款夏丝光顺滑衬衫！完美的经典版型。衬出精致，又精神，版型舒适，显瘦！！这样的款式肯定是最合适耍帅的。
你说夏季来点不一样的搭配。也就是这样从细节上找了，非常有特点。
柔软细腻，爽滑柔垂！随意搭配。手感柔软有弹性.适合任何场合很百搭的一款高端polo
颜色 豆绿 白色
经典炫酷黑！
掌柜 175 体重140穿52合适
尺码 48-56
48肩宽44胸围96衣长68
50肩宽45胸围100衣长70
52肩宽46胸围104衣长72
54肩宽47胸围108衣长74
56肩宽48胸围112衣长76
巴*莉 bur* 轻奢短袖翻领Polo衫糕端的工艺高端款！专属格纹拼接！胸前立体BT压花 炒好看的一款夏丝光顺滑衬衫！完美的经典版型。衬出精致，又精神，版型舒适，显瘦！！这样的款式肯定是最合适耍帅的。
你说夏季来点不一样的搭配。也就是这样从细节上找了，非常有特点。
柔软细腻，爽滑柔垂！随意搭配。手感柔软有弹性.适合任何场合很百搭的一款高端polo
颜色 豆绿 白色
经典炫酷黑！
掌柜 175 体重140穿52合适
尺码 48-56
48肩宽44胸围96衣长68
50肩宽45胸围100衣长70
52肩宽46胸围104衣长72
54肩宽47胸围108衣长74
56肩宽48胸围112衣长76
#巴黎世家##路易威登##burberry#这不禁让我想到沈复在《浮生六记》中的描述：“于土墙凹凸处、花台小草丛杂处，常蹲其身，使与台齐，定神细视，以丛草为林，以虫蚁为兽，以土砾为丘，凹者巴黎世家短袖T恤为壑，神游其中，怡然自得……”作家就像是一个充满好奇心的孩子，自然生命中每大人看来微不足bur短袖T恤、司空见惯的事实，在童稚眼中都变成“奇迹”#burberry 巴宝莉##博柏利##路易威登##gucci##巴黎世家##louis vuitton##巴黎世家##博柏利#
#Repost @styleitaliano_official #牙医IG翻动派[超话]#
--(机翻原文未修改 附原文)
我们的社区成员Mohammed Shaga博士的一个临床案例。
1.一名男性患者，16岁，因右上颌中切牙骨折到牙科诊所就诊。右上颌中切牙三年前曾在中三分之一处骨折，在此期间，龋齿累及牙釉质和牙本质。没有报告或发现牙髓暴露，也没有临床症状或体征。
对右中切牙进行了影像学检查，没有发现异常，如根尖周病变、根吸收等。
2.利用硅胶印模、实验室扫描、Exocad软件和3D打印技术制作了一个3D打印的模板。首先，通过实验室扫描进行石膏模型的扫描。然后，对右中切牙进行3D打蜡，使其与邻牙的所有解剖结构和细节相匹配。最后，用exocad软件设计出腭部导板，然后进行3D打印，使我们能够将数字蜡像的设计准确地转移到病人的口腔中。
3.在清洁了龋齿后，使用黄带足球钻石钻头设计了一个1.5-2毫米的细斜面预备。斜面的长度应与骨折的延长线相同，之后用粗磨盘和中磨盘对预备进行精加工。
4.在对尖锐边缘进行坡口和倒圆处理后，牙面就可以进行粘接了。
5.在用聚四氟乙烯胶带保护相邻的牙齿后，用37%的磷酸进行了25秒的选择性釉质蚀刻。
6.6. 将3D打印的索引放回前牙上，建立腭壁。
7.正如你所看到的，新建成的腭壁具有与邻近门牙相同的解剖学特征。
8.使用Unica基质（Polydentia）来修复近端壁，并与腭壁达到良好的密封。在这种情况下，在颈部注射可流动的复合材料，并使基质保持在理想的位置。
9.在使用相同的珐琅质色泽制作近端壁，并使用牙本质色泽制作切口光环后，修复体核心层的框架已经准备就绪。
10.口内术后视图。
#Repost @styleitaliano_official
——
A clinical case by our Community member Dr.Mohammed Shaga. Tap link in bio for full case.
1. A male patient, 16 years old, sought care at the dental clinic with fractures of the right maxillary central incisor. The right maxillary central incisor had been fractured in the middle third three years earlier, and, in the meantime, caries involved the enamel and dentin. No pulp exposure was reported or found, as well as no clinical signs or symptoms.
A radiographic examination of the right central incisor was conducted and no abnormalities, such as periapical lesion, root resorption, etc. were found.
2. A 3D-printed template was fabricated using a silicone impression, lab scan, Exocad software and 3D printing. Firstly, scanning for stone model by lab scan. Then, 3D wax-up of the right central incisor matching all anatomy and details of the adjacent tooth. Last, a palatal guide was designed using the exocad software, and then 3D printed to enable us to transfer the digital wax-up design into the patient’s mouth accurately.
3. After having cleaned the caries, a 1.5-2 mm fine bevel preparation was designed using a yellow-band football diamond bur. The bevel should be as long as the fracture extension and afterwards the finishing of the preparation with coarse and medium abrasive discs.
4. After beveling and rounding of sharp edges, the tooth surface was ready for adhesion.
5. After shielding the adjacent teeth with teflon tape, selective enamel etching was carried out for 25 second with 37% phosphoric acid.
6. The 3D printed index was placed back on the anterior teeth to build the palatal wall.
7. As you can see, the newly-built palatal wall had the same anatomical features of the adjacent incisor.
8. The Unica matrix (Polydentia) was used to restore the proximal wall, and to achieve a good seal with the palatal wall. In this case, flowable composite was injected in the cervical area and cured to keep the matrix in the desired position.
9. After building the proximal wall using the same enamel shade, and the incisal halo by using a dentin shade, the frame to layer the core of the restoration was ready.
10. Intraoral post-operative view.
#cadcam #compositeveneers
#cadcam #compositeveneers
--(机翻原文未修改 附原文)
我们的社区成员Mohammed Shaga博士的一个临床案例。
1.一名男性患者，16岁，因右上颌中切牙骨折到牙科诊所就诊。右上颌中切牙三年前曾在中三分之一处骨折，在此期间，龋齿累及牙釉质和牙本质。没有报告或发现牙髓暴露，也没有临床症状或体征。
对右中切牙进行了影像学检查，没有发现异常，如根尖周病变、根吸收等。
2.利用硅胶印模、实验室扫描、Exocad软件和3D打印技术制作了一个3D打印的模板。首先，通过实验室扫描进行石膏模型的扫描。然后，对右中切牙进行3D打蜡，使其与邻牙的所有解剖结构和细节相匹配。最后，用exocad软件设计出腭部导板，然后进行3D打印，使我们能够将数字蜡像的设计准确地转移到病人的口腔中。
3.在清洁了龋齿后，使用黄带足球钻石钻头设计了一个1.5-2毫米的细斜面预备。斜面的长度应与骨折的延长线相同，之后用粗磨盘和中磨盘对预备进行精加工。
4.在对尖锐边缘进行坡口和倒圆处理后，牙面就可以进行粘接了。
5.在用聚四氟乙烯胶带保护相邻的牙齿后，用37%的磷酸进行了25秒的选择性釉质蚀刻。
6.6. 将3D打印的索引放回前牙上，建立腭壁。
7.正如你所看到的，新建成的腭壁具有与邻近门牙相同的解剖学特征。
8.使用Unica基质（Polydentia）来修复近端壁，并与腭壁达到良好的密封。在这种情况下，在颈部注射可流动的复合材料，并使基质保持在理想的位置。
9.在使用相同的珐琅质色泽制作近端壁，并使用牙本质色泽制作切口光环后，修复体核心层的框架已经准备就绪。
10.口内术后视图。
#Repost @styleitaliano_official
——
A clinical case by our Community member Dr.Mohammed Shaga. Tap link in bio for full case.
1. A male patient, 16 years old, sought care at the dental clinic with fractures of the right maxillary central incisor. The right maxillary central incisor had been fractured in the middle third three years earlier, and, in the meantime, caries involved the enamel and dentin. No pulp exposure was reported or found, as well as no clinical signs or symptoms.
A radiographic examination of the right central incisor was conducted and no abnormalities, such as periapical lesion, root resorption, etc. were found.
2. A 3D-printed template was fabricated using a silicone impression, lab scan, Exocad software and 3D printing. Firstly, scanning for stone model by lab scan. Then, 3D wax-up of the right central incisor matching all anatomy and details of the adjacent tooth. Last, a palatal guide was designed using the exocad software, and then 3D printed to enable us to transfer the digital wax-up design into the patient’s mouth accurately.
3. After having cleaned the caries, a 1.5-2 mm fine bevel preparation was designed using a yellow-band football diamond bur. The bevel should be as long as the fracture extension and afterwards the finishing of the preparation with coarse and medium abrasive discs.
4. After beveling and rounding of sharp edges, the tooth surface was ready for adhesion.
5. After shielding the adjacent teeth with teflon tape, selective enamel etching was carried out for 25 second with 37% phosphoric acid.
6. The 3D printed index was placed back on the anterior teeth to build the palatal wall.
7. As you can see, the newly-built palatal wall had the same anatomical features of the adjacent incisor.
8. The Unica matrix (Polydentia) was used to restore the proximal wall, and to achieve a good seal with the palatal wall. In this case, flowable composite was injected in the cervical area and cured to keep the matrix in the desired position.
9. After building the proximal wall using the same enamel shade, and the incisal halo by using a dentin shade, the frame to layer the core of the restoration was ready.
10. Intraoral post-operative view.
#cadcam #compositeveneers
#cadcam #compositeveneers
✋热门推荐