来咯 来咯 我决定今天更新一下我一个星期前的生活
1.是的我还没上学呢 一个星期前也没有一个星期后也没有
2.关于我一个星期前的生活详情请看图片哈哈哈 妈妈还专门请了吃麦当劳 没想到!对面的一户人家养了一屋子的鸽子!一个星期前去找xff和fxx路过的花店 向日葵都开了 春日限定!
3.我希望大家都要平平安安的
4.深圳今天下雨了 会不会是久旱逢甘雨 马上就要守得月明见云开呢 深圳加油!!
1.是的我还没上学呢 一个星期前也没有一个星期后也没有
2.关于我一个星期前的生活详情请看图片哈哈哈 妈妈还专门请了吃麦当劳 没想到!对面的一户人家养了一屋子的鸽子!一个星期前去找xff和fxx路过的花店 向日葵都开了 春日限定!
3.我希望大家都要平平安安的
4.深圳今天下雨了 会不会是久旱逢甘雨 马上就要守得月明见云开呢 深圳加油!!
碎碎念吧
我想说xff还是懂我的知道备注回民
但是这几个菜……幸好我昨天也不是很饿
要不然整真得再吃第二顿
400多就吃了一只虾和螃蟹……
而且之前爱喝的奶昔昨天再喝就不爱喝了
喝了1/4就扔了
太甜了菜也很咸 全程喝白水
最后服务员可能也是加水加烦了 直接放了一壶
阿玛尼散粉怎么不火呢
定妆真的可以啊
我真的不适合tufting
虽然我真的很喜欢
但是我可能真的没有耐心……
最后老板说可以画画
我和xff的
就知道我有多烦了
老板看完 噗的一声说
也行
从韩国斥巨资买的line
最终沦为玩具[单身狗][单身狗][单身狗][单身狗]
Xff简直是气人第一名
我想说xff还是懂我的知道备注回民
但是这几个菜……幸好我昨天也不是很饿
要不然整真得再吃第二顿
400多就吃了一只虾和螃蟹……
而且之前爱喝的奶昔昨天再喝就不爱喝了
喝了1/4就扔了
太甜了菜也很咸 全程喝白水
最后服务员可能也是加水加烦了 直接放了一壶
阿玛尼散粉怎么不火呢
定妆真的可以啊
我真的不适合tufting
虽然我真的很喜欢
但是我可能真的没有耐心……
最后老板说可以画画
我和xff的
就知道我有多烦了
老板看完 噗的一声说
也行
从韩国斥巨资买的line
最终沦为玩具[单身狗][单身狗][单身狗][单身狗]
Xff简直是气人第一名
A.9 KgNB and KN3IWF derivation function 33.501
When deriving a KgNB from KAMF and the uplink NAS COUNT in the UE and the AMF the following parameters shall be used to form the input S to the KDF.
- FC = 0x6E
- P0 = Uplink NAS COUNT
- L0 = length of uplink NAS COUNT (i.e. 0x00 0x04)
- P1 = Access type distinguisher
- L1 = length of Access type distiguisher (i.e. 0x00 0x01)
The values for the access type distinguisher are defined in table A.9-1. The values 0x00 and 0x03 to 0xf0 are reserved for future use, and the values 0xf1 to 0xff are reserved for private use.
The access type distinguisher shall be set to the value for 3GPP (0x01) when deriving KgNB. The access type distinguisher shall be set to the value for non-3GPP (0x02) when deriving KN3IWF.
The input key KEY shall be the 256-bit KAMF.
This function is applied when cryptographically protected 5G radio bearers are established and when a key change on-the-fly is performed.
ME和AMF可根据KAMF计算生成KgNB,或者由目标gNB计算生成。长度为256bits。
KDF(Key,S),其中Key为256-bit KAMF, S值如下:
FC = 0x6E
P0 = Uplink NAS COUNT
L0 = length of uplink NAS COUNT (i.e. 0x00 0x04)
P1 = Access type distinguisher
L1 = length of Access type distiguisher (i.e. 0x00 0x01)
When deriving a KgNB from KAMF and the uplink NAS COUNT in the UE and the AMF the following parameters shall be used to form the input S to the KDF.
- FC = 0x6E
- P0 = Uplink NAS COUNT
- L0 = length of uplink NAS COUNT (i.e. 0x00 0x04)
- P1 = Access type distinguisher
- L1 = length of Access type distiguisher (i.e. 0x00 0x01)
The values for the access type distinguisher are defined in table A.9-1. The values 0x00 and 0x03 to 0xf0 are reserved for future use, and the values 0xf1 to 0xff are reserved for private use.
The access type distinguisher shall be set to the value for 3GPP (0x01) when deriving KgNB. The access type distinguisher shall be set to the value for non-3GPP (0x02) when deriving KN3IWF.
The input key KEY shall be the 256-bit KAMF.
This function is applied when cryptographically protected 5G radio bearers are established and when a key change on-the-fly is performed.
ME和AMF可根据KAMF计算生成KgNB,或者由目标gNB计算生成。长度为256bits。
KDF(Key,S),其中Key为256-bit KAMF, S值如下:
FC = 0x6E
P0 = Uplink NAS COUNT
L0 = length of uplink NAS COUNT (i.e. 0x00 0x04)
P1 = Access type distinguisher
L1 = length of Access type distiguisher (i.e. 0x00 0x01)
✋热门推荐